The bolt pattern for a 2012 Toyota Avalon is 5x114.3 (or 5x4.5 ), indicating that each wheel has five bolts (or lugs) that are arranged circularly with a 114.3 mm (4.5 inches) diameter.
One of the simplest yet cool 2012 Toyota Avalon mods is to replace stock wheels with bigger aftermarket options.
However, before you switch, you must know your 2012 Toyota Avalon lug pattern to confirm compatibility with the new set of wheels. But even if the current bolt pattern of your 2012 Toyota Avalon and the new wheels do not match, consider converting to the required scheme using the wheel adapters.
Also, new rims must sit within the wheel offset range, and the 2012 Toyota Avalon's stud must fit onto the hub bore. Use the measurements below while searching for new wheels.
A bolt pattern, or lug pattern, is a two-number system used to measure the imaginary circle (PCD) formed by the lug holes at the center of a wheel. The first number counts the holes in the wheel, while the second number indicates the pitch circle diameter in mm or inches.
Measures the distance from the hub mounting surface to the center of the wheel. It is vehicle specific.
Dimensions of the stock tires, including its width, aspect ratio (sidewall), and diameter.
Dimensions of rims recommended by the manufacturer.
Please note: If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.
Unscrew and separate the two adapter pieces first.
Install the inner adapter piece using short open-end lug nuts with no more than 13/16" hex.
If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.
Bolt the outer adapter piece to the inner piece using provided black Allen bolts.
Install your wheels to the studs of the outer adapter piece using proper lug nuts that both match the thread size of the adapter studs and the seating style of your wheels.